A convenient and simple applicator

 You didn't think we'd praise our many cool tools without mentioning the bedazzler kit with rhinestones, did you? The name is spelled out for you. It's a tool check. It fixes things - that is to say, turns things into shiny things - check it out. It's hot! Check it out! Yes, it's technically the opposite of Cool, but Hot is even cooler than Cool.

Our Hotfix Rhinestones applicator is a sexy combination of a magic wand and a curling iron. If you've never used Hot Fix elements before, they're actually pretty fun. This hotfix tool items are essentially iron-on; they have an adhesive backing that melts before being attached to your project. They have been developed specifically for fabrics. Because iron settings and fabric properties vary so much, precision rods are great for applying your heat repair elements directly. No glue mess, no glue smell.

The steps are very simple.
1. Place your stones face up (it's a very satisfying thing to see a whole bunch of rhinestones all arranged like this).
2. Touch the preheated metal tip of your hot fix tool to the top of the stone and it will pick it up (it's a bit like watching a magnet attract in front of your eyes).

3. leave it dangling for about 5 to 10 seconds. If you look at the glue, you will notice it getting softer and shinier as you watch (at first it is barely perceptible, but suddenly you realize you are witnessing the glue melting before your eyes, like seeing the Wicked Witch of the West sink into a bucket of underwater piles). Don't wait too long after the adhesive has brightened or started to bubble - if you burn the glue off, the stone won't stick.

4. Press the stone onto the design and hold it in place for a moment, about two seconds, then release it straight up. The metal tip has slits in the center - these are useful for aligning the position in the design (these slits allow the metal tip to be flexible enough to fully grip your crystal. They can also be left in the wand as an emergency exit strategy if your stone so decides; simply use fine tweezers or pins to secure them to the fabric while lifting the wand). ** Always run a test run for any project in an inconspicuous area before submitting.

Worhofbest is very much an approved bedazzler kit with rhinestones. It includes the Hotfix Rhinestones applicator wand tool kit bedazzler kit with rhinestones - a kit of 5 Hotfix Rhinestones with a soft-touch handle that curves at the top to fit in your hand and prevent fatigue. The nozzle is also recessed and the shorter design aids control. It includes a cleaning brush and a holder.

Gems, shaped crystals, hot repair metals and pearls outside the size range can be set using the universal flat metal tip, available in two sizes. Not all tips are provided for every wand; options are included to help you decide which hot fix tool to purchase. we also sell all-metal tips separately to complement your set or to replace lost or damaged parts.

When using different crystal sizes in their designs, some customers prefer to use multiple tools at the same time. This eliminates the need to turn off and reheat the tip while you are working, which can slow you down. If you find yourself working most often with a particular size of the stone, it may be helpful to purchase an extra tip of that size. Over time, the tip may build-up traces of adhesive and fail to hold the rhinestone in place. If this happens, remove the hot tip with a thermal pad, set it aside to cool, and screw in a spare tip. When the hot tip has cooled completely, clean it with a ball of steel wool or steel bristle brush.

Remember, as cool as this cool tool is, it's actually quite hot. Literally. Be careful when handling the Hotfix Rhinestones applicator itself as well as the rhinestone and metal studs you are attaching.

https://www.amazon.com/dp/B08PZ111VC